Specification
Product Name: Bluetooth Audio Receiver
Bluetooth version: 5.0 APT-X, HD, low latency
Bluetooth chip: CSR 8675
Support: APT-X, APT-X Low Latency, AAC, SBC
Bluetooth range: more than 20m
Bluetooth Frequency: 2.402 ~ 2.480GHz;
Output: optical input, optical output, the AUX input, the AUX output
Charging interface: 5V DC, 500mA
Battery capacity: Actual 400mah lithium-ion polymer rechargeable battery
Delay: <40 milliseconds (ms)
Bluetooth protocol: A2DP, AVRCP (can be connected to support A2DP profile Bluetooth speakers or headphones, make up a wireless audio transmission network, used in televisions, CD, home theater and other equipment; can also be connected to a mobile phone / computer to play music)
Packing list:
1X host
1X optical fiber audio data cable
1X 3.5mm AUX-3.5mm AUX audio cable
1X 3.5mm-RCA lotus head adapter
1X Micro USB charging cable
1X Chinese and English manual
Notice:
All images and descriptions are for illustrative purposes only. Product specification, functions and appearance may vary by actual usage. The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.
Toggle switch and M key to switch modes. TX / RX, fiber and any mode can be switched arbitrarily in the state of turning on. There is no need to shut down. At present, we can do on the market without switching off TX / RX first All the same products on the market need to be switched off when switching between RX / TX. This is our advantage. You don't need that complicated operation, you can switch modes at will.
We have two interfaces: AUX input and AUX output. Compared with the same interface, stereo sound is more obvious. (AUX: audio interface; SPDIF: optical fiber interface) Select audio interface or optical fiber interface.
JRBC05 supports one with two functions (two stereo Bluetooth speakers or stereo Bluetooth headphones can be connected at the same time in TX state, and two speakers / headphones can emit sound at the same time; two phones can be connected at the same time in RX state, currently only one phone can make sound , Which phone sounds first is currently the sound of which phone).
