Description:
Item type:Cards Adapter
Smart Apple Card, a new product that combines Bluetooth and MODEM, uses Bluetooth to connect with Apple devices, and uses IOS App to realize the expansion of SIM card voice calls and SMS functions for Apple devices, especially for users. Dual card dual standby function with one mobile phone
1---Switch button, long press for 5 seconds to boot, long press for 3 seconds to shut down, 2---self-timer button, click to take photos, 3---SIM card slot, Nano SIM card, 4---Micro USB Charging hole
3. APP software function requirements: 1. Bluetooth version of iOS device
4.0 (iPhone4S+), 2. iOS version is iOS7.1+, 3. Only supports Unicom/Mobile GSM network, supports call & SMS, does not support data function, 4. Supports cloud service function of call and SMS, 5. Supports many countries Language (tentative: simplified Chinese, English), 6. Support device low-power reminder function, (App pop-up window reminds low battery, similar to IOS local low battery reminder), 7. Support users to connect device reminder function via Bluetooth ( After the app is successfully connected, the pop-up window in the app shows a successful connection). 7. It has an anti-lost alarm function. When the mobile phone is far away, the buzzer keeps beeping. When the sound continues to sound, the button can be used to eliminate the sound. 8. Support reading the mobile phone Original address book function, and address book synchronization function, 9. Support display device phone number, carrier name and device power function
4. Product specifications 1. Hardware functions: 1. Apple mobile phone requires iPhone4S and above, connected to iOS system via APP, (requires iOS7.1 or above), 2. BT Bluetooth module signal transmission distance is 10 meters, support Class I standard, 3. Supports batteries larger than 400MAH capacity to support no less than 4 hours of talk and more than 30 hours of standby
5, plug-in device SIM card type: Nano SIM card
USB socket type: MICRO USB
5. Button function 1) Button 1: Press and hold for 3 seconds to control the power switch (ON/OFF); short press to cancel the buzzer alarm when disconnecting
2) Press 2: In the connected state, press and hold for 3 seconds to find the mobile phone; short press to open the camera in the connected state, then short press to realize remote control
Second, MODEM performance indicators 1, network type: GSM (support mobile, China Unicom, does not support telecommunications)
2. Network band: GSM850MHz/EGSM900MHz / DCS1800MHz / PCS1900MHz global frequency band
5. Instructions for use: 1. First, please open the Bluetooth function of the IOS device. 2. Please go to the Apple App Store to search for the app "ikos" and download and install. 3. Press and hold the product power button for 4 seconds, the indicator light flashes alternately. Enter the pairing mode, 4. Go to IKOS APP -> Settings -> Find the IKOS product in the scanning device (Note: pairing in the IKOS APP, not in the Bluetooth function of the iOS device!), 5. Click The device, when the display is connected, the device red light is off, the green light flashes, if the green light flashes once every 6 seconds, it means that the GSM registration is online, it can be used normally, the phone can answer the call, and the short message is sent and received.
Difficult questions and answers: 1. Can't find an app or an app not working properly? 1). Please make sure that the iOS version of the phone is 7.1 or higher, and the Bluetooth hardware is 4.0. 2). Please make sure the iPhone is iPhone4s or higher. 3). Please confirm that you have selected the correct App download and installation. 4). Please make sure the iOS device Bluetooth function is turned on.
2. The product cannot receive SMS or incoming calls: Please make sure the product is connected to the mobile phone normally and within working distance (within 10 meters). 2). Please ensure that the product successfully registers with the mobile network. There is corresponding carrier information in the upper left corner of the app, and the green LED is in slow flashing state. 3). Please ensure that the product is fully charged. 4). Please download the installation app again and reconnect. 5). Please try to turn off the phone Bluetooth, restart the phone and turn it back on.
3. How long does it take to charge a single charge: it takes about 2 hours under normal conditions. The red light is on when charging, and the green light is long after being filled.
4. How long can I use after full charge: ≤ 4 hours
Standby time: 30 hours
Recommendations: 1. Use the Nano SIM card directly. 2. Install the SIM card in the off state
In the upper right corner of the app, there is a corresponding battery icon display: In order to get a better user experience, please remember to charge your product in time.
Package Include:
1 x product, 1 x Manual, 1 x box packaging
Note:
The colors deviation might differ due to different monitor settings.
Without loss of data traffic, network bandwidth quality does not affect call quality, no roaming.
Change life from now, iphone dual sim dual standby, Let ipad itouch reality Bluetooth call.
Lightweight and portable size, easy to carry and use.
