Description:
Product Category:Bluetooth Ring Remote Control
Bluetooth version: 5.0
Battery capacity: 30 Ma
Service distance: 10M
Standby time: 30 days
Because the Bluetooth Rings Is HID's Keyboard Protocol, after Apple's Mobile Phone Is Connected (There Will Be Compatibility Problems), It Will Occupy the Input Method Operation (Android Mobile Phone Does Not Affect), therefore, after Connecting the Rings on Apple's Mobile Phone, in the Input and Typing Interface, It Can Only Be Input by Handwriting, and Other Input Cannot Be Used. If You Want to Use Pinyin Or English Input, Rings Must Be Disconnected from the Mobile Phone. after the Disconnection, If the Mobile Phone Wants to Connect with Rings Again, as Long as the Mobile Phone Turns on Bluetooth and Presses Any Button on Rings, It Will Automatically Connect with the Mobile Phone.
1: when you double-click the MODE mode button, the corresponding mode LED lights 2S, (audio mode tiktok, jitter mode green light).
2: The red light is the charging indicator light. The charging red light is on and the full red light is off;
3: Press any key to connect automatically after disconnecting from the mobile phone;
4: Can enter low power consumption mode;
5: 30s broadcast timeout (no device connected), enter deep sleep;
6: Press the mode key for two seconds to release the previous pairing information, restore the factory settings, and enter the pairing mode (white and green lights flash alternately);
7: When the battery voltage is less than 3.3V, the blue light flashes twice every 3 minutes, indicating that the battery voltage is low;
Packing list:
1 x Data line
1 x product
1 x Manual
1 x box packaging
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
After Leaving the Mobile Phone and Disconnecting, Press Any Button to Automatically Connect.
Can Enter the Low-Power Mode.
30S Broadcast Timeout (No Connected Device), Enter Deep Sleep.
Press the Mode Key for Two Seconds to Release the Previous Matching Information, Restore the Factory Settings, and Enter the Matching Mode (the White and Green Lights Flash Alternately).
.
